Enamo Grip ® White

Technical
Data Sheet
Enamo Grip ® White
Projects
Product
Certifications
Application
Instructions

For Low Maintenance

ENAMOGRIP ® is a tough, moisture curing, two component polyurethane enamel, which produces a uniquely hard and durable coating film. ENAMOGRIP ® will demonstrate unsurpassed semi gloss retention, color retention, and chalk resistance, when utilized for exterior coating situations. ENAMOGRIP ® will provide outstanding resistance to water and humidity, stains, chemicals, and solvents, as well as tremendous scuff, mar, and impact resistance. Ideal for use on bridges by itself or applied over RUSTGRIP ® or MOIST METAL GRIP ® for complete encapsulation of the metal, providing protection from rust and corrosion for a minimum of 20 years in normal circumstances.

Resistant to hail damage and similar abuses that create opportunities for rust and corrosion, completely UV- controlled and weather resistant.ENAMOGRIP ® is a self leveling formula for an outstanding finish. ENAMOGRIP ® can be used on flooring for a tough, long wearing surface but precise measures must be taken to insure a completely clean surface, free from moisture and residues to adhere to. In summary, the overall toughness, durability, and weather resistance of ENAMOGRIP ® polyurethane enamels, make them the ideal choice for demanding product applications for architectural maintenance situations that require the utmost in exterior durability. ENAMOGRIP ® is an ambient/slow moisture-cure coating.

Graffiti-Proof Resistance

ENAMOGRIP ® is ALWAYS used as the topcoat for GRAFFITI PROOFING because it has absolutely no pigments for the graffiti to attach to. The ENAMOGRIP ® in white or light colours may show a slight shadow. Once the ENAMOGRIP ® has cured, applications of "Krylon" spray paint, Magic Markers, etc. can be wiped off completely with Superior's specially-blended graffiti cleaner. ENAMOGRIP ® can withstand years of graffiti removal as it is not affected by solvents and does not breathe to allow spray paints or oils to penetrate its surface. Keytone, MEK or other solvents may be used to remove graffiti from its surface provided environmental considerations are not a factor.

Features

  • Non-Skid element: The formula of resins will lay out and self level into a beautiful, evenly spread gloss finish (no brush marks). Even though the coated area looks glossy, the surface is not slippery even when wet, with minor exceptions for some hard shoe soles.
  • Cures by moisture in the air and heat reactivity in 7 - 10 days to full cure 
  • Impact Resistance: Front: 160 psi / Back: 100 psi
  • Lead and Chromate Free
  • Tinting: Can be factory tinted any colour with a minimum of 60 gallons ( lower quantities may be available with written approval ) - otherwise the white base can be tinted locally to mid tones using 844 Series for 2 part polyurethane.

Chemical Resistance

Listing of acid compounds that ENAMOGRIP ® is resistant to. Solutions to a maximum of 15%

Acetone
Acetonitrile
Acetylene, gas
Acropol
Aircraft gasoline
Airturbo fuel
Alcohol, linear primary C12-C-15
Alcohol ethoxylate, linear primary
Alcohol ethoxylate, ammonium salt solution
Alcohol ethoxysulfate, sodium salt solution
Alkane
Alkyl benzene
Alkylate bottom
Alkylate detergent
Alkylate 22
Alkylate 130
Allyl Alcohol
Alpha olefins
Alpha olefin C-6/7
Alpha olefin C-7/8
Alpha olefin C7/14
Alpha olefin C-10/15
Alpha-hydroxytoluol (Benezyl alcohol)
Alpha-N-amylene
Amyl carbinol
Amylene
Amylene hydrate
Amyl hydride
Anivax SX 3158
Antifreeze
Aromatic 100
Asphalt cut back
Aviation alkylates
Aviation gasoline
Aviation kerosene
Benzene
Benzol
Benzyl alcohol
Blandol
Bunker oil
Butyl alcohol
Calcium alkyl salicylate
Carbon dioxide (gas) 100%
Carbonic acid
Certrex's mineral spirits
Circo light oil
Citric acid
Coal tar benzene
Cottonseed oil stearine
Cycloheptane
Decyl alcohol
Detergent alkylate
Diesel fuel
Diethylbenzene
Diethylene glycol
Dipropyl ketone
Dodecyl alcohol
Engine oil
Ethoxol
Ethylene glycol methyl ether
Extender process oils
Fuel, jet JP4
Fusel oil, aice free
Glycol
Heptane
Hexyl alcohol
Isooctane
Isopropyl ether
Kerosene
Methanol
Methylbenzene
Mineral spirits
Naphtha, gasplant
Octane (iso and normal)
Olefin mixture (C5-C7)
Polyethylene glycol
Sodium chloride
Stoddard solvent
Toluene, industrial
Toluol (Toluene)

Additional

Potassium Hydroxide
Sodium Hydroxide
Sulfuric Acid
Nitric Acid
Acetic Acid

Limited Warranty

Unless Superior Products provides a written warranty of fitness for a particular use, Superior Product's sole warranty is that the product, as supplied, will meet then current sales specifications and is specific only to return of product found to be defective upon opening of container within one year. Customer's exclusive remedy and Superior's sole liability for breach of warranty is limited to refund of the purchase price or replacement of any product shown to be other than as warranted and Superior Products expressly disclaims any liability for incidental or consequential damage.

TOP BACK