RUSTGRIP® (NON SLIP) CERTIFICATIONS

RUSTGRIP ®

**TEST LISTINGS**

1. RUSTGRIP ® PATENT  
     
2. Full List of Testing and Certifications (151 pages)  
     
3. ASTM ( American Society for Testing and Materials )  
B 117 Standard Practice for Operating Salt Spray (Fog) Apparatus The coated panels were exposed in a Salt Fog Chamber maintained in accordance with B 117, for 15,000 hours. The panels were evaluated periodically for blistering overall in accordance with D 714 and rust staining overall in accordance with D 610 and achieved a perfect 10 in both at the end of the 15,000 hours Passed
15,000 hours
C 411 96 Hour Hot Surface Performance Passed
  - Tested at 147°C (293°F)  
- No Ignition, Smoking, or Smoldering  
- No Change in Colour  
  D 522 - Flexibility Passed
  D 1308 - Distilled Water Resistance (Immersion 24 hours) Passed
  - .010" Tin plated Steel  
- 1/4" Steel or Aluminum
- 24 Hour Chemical Resistance (12 Reagents) - Spot Test on Glass
  D 1475 - Volatile Organic Content Passed
  D 1653 - Water Vapor Transmission Passed
  D 2369 - Volatile Organic Content Passed
  D 2370 - Visco-Elastic Properties Passed
  D 2486 - Scrub Resistance Passed
  - Black Plastic - No Break thru after 12 cycles  
  D 2794 - Direct Impact Resistance Passed
  D 3273 / D 3274 - Mildew Resistance Passed
  D 3359 Adhesion and Penetration testing Passed
  - Penetration through 18 layers of Oil Base Paint  
- Rated 5A = Excellent
MICRO PHOTOGRAPH
  D 3960 / D 4017 - Volatile Organic Content Passed
  D 4060 Tabor Abrasion Resistance Passed
  - Dry Abrasion Resistance  
- 1000 Cycles with a CS 17 Wheel, 1000 gram Load
- 18 milligram loss per 1000 Cycles, rated Excellent
  D 4541 Standard Method for Pull-Off Strength of Coatings using Portable Adhesion Testers Passed
  - Average Pull-Off Strength = 1,467 psi  
  D 5894-10 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet.) Blistering & Rusting Evaluation. Passed 1000, 5000, 10,000 Hours
  D 6904 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied to Masonry Passed
  D 7088 Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry Passed
  E 108 Standard Test Method for Spread of Flame of Roof Coverings Class "A" Rating
  E 1795 BioHazard Encapsulation Certification Conforms to all requirements
  - Direct Impact Resistance  
- Adhesion
- Dry Abrasion Resistance
- Water Vapor Transmission
- Flexibility
- Water and Chemical Resistance
- Water Immersion
- Surface Burning Characteristics
- Volatile Organic Content
- Weathering (1000 hours)
- Aging (interior and exterior)
- Scrub Resistance
- Mildew Resistance
- Paint / Repair Ability
- Tensile Properties
  E 84 - Surface Burning Characteristics Passed
  G 20Standard Test Method for Chemical Resistance of Pipeline Coatings.  
  G 85 Prohesion over rusted metal Passed
  - Rated 9 (out of a possible 10 rating)  
     
4.US Army Corp of Engineers  

Test Report

Passed
Moisture-Cure Urethane Coatings for Compliance with Industry Specifications SSPC Paint 41  
   
     
5. Factory Mutual Approval  

ASTM E 108 Tested and Approved for Roofing and all other Applications

Class A
*Superior Products International II, Inc. is an active member of the NRCA.  
( National Roofing Contractors Association )  
     
6. WINDOW CYCLING Test  
  Opening/Closing of treated window to measure friction/wear Passed
  - Completed 20,000 cycles of opening / closing the window. 54 years of protection  
     
7. DNV Certification Passed
- DNV Audit and DNV Compliant Passed
- ASTM B 117, D 163, D 522, D 3359, D 4060, & E 1795  
- Official DNV Certification of RUSTGRIP ® for Maritime usage. DNV Certified
     
8. State of Louisiana Department of Transportation  
     
9. State of Oklahoma Department of Transportation  
     
10. State of Tennessee Department of Transportation  
     
11. ABS Coast Guard Approval  
 
     
12. Transport Services Division Pavements & Structures Section – Materials Group  
Pull tests rated equal to 1100 psi.  
     
13. Aramco Oil in Saudi Arabia Approval for Asbestos Encapsulation Approved Product
     
14.VTEC Laboratories INC  
Thermal analysis  
     
15. LEED - Leadership in Energy & Environmental Design Approved product
May 1, 2007 (revised May 21, 2007) (Washington, DC) – The U.S. Green Building Council (USGBC) has announced that projects seeking certification under the LEED ® Green Building Rating System™ can now earn an "Innovation in Design" point by using the Cradle to Cradle program for certified building products.  
GOLD CERTIFICATION  
     
16. USDA (United States Department of Agriculture )  
- Letter of Authorization from USDA Product Safety Branch USDA Approved
- Letter of Written Certification as Accepted by USDA from Manufacturer Approved
- Environmentally safe and safe for use around animals Passed
     
17. CFIA Canadian Food Inspection Agency  
  Accepted construction material Passed
     
18. China Center for Technical Testing  
  National Measurement M0729  
  GB/T 1771-91 - Resistance to Salt Fog (2000 hours) Passed
  GB/T 1866-88 - Manual Aging (2000 hours) Passed
  GB/T 10834-88 - Resistance to Salt Water (1000 hours) Passed
  GB/T 5219-85 - Adhesion (pulling apart method) 4.07MPa
  GB/T 1733-93 - Boiling Water Immersion 8 Hours
TOP BACK