Epoxotherm Application

Application Videos

• Moist Metal Grip Application as Primer for Epoxotherm Video

Thickness required always depends on dewpoint differential and surrounding conditions. Dewpoint Chart or Dew Point Calculator.

MSDS Quick View

• Flammable liquid
• DOT #UN-1263
• Lead- and chromate-free
• VOC is 298 grams / liter, well under the codes

Safety Precautions

Applicator must, at all times during use, wear a Bureau of Mines-approved, 2-stage (charcoal and cotton) paint spray respirator, designed for removal of organic vapors, or a fresh air-supplied type of respirator. Protective clothing and protective eye-wear (goggles) are recommended.

IMPORTANT:
Do not apply over chlorinated rubber or where chlorinated rubber has been. Even after sandblasting, the chlorination can attack the solvents and brittle the coating.

Coverage Recommendations

• Extreme Condensation or Icing 10 – 15 sf per gallon
• All Other Surfaces 100 sf per gallon
• Thickness depends on dewpoint differential and surrounding conditions.
• NOTE – 1 mil = 1 thousandths of an inch 1/1000″